Introduction of Dingli palm shell charcoal machine

The palm shell cahrcoal machine adopts continuous output mode, which has high efficiency, high yield and high benefit, so that customers can rest assured.

Palm shell charcoal machine is a continuous smokeless carbonization equipment. Combustible gases such as carbon monoxide, methane, and oxygen produced during the carbonization process of materials can be recycled and used as heat sources. That is to say, it solves the problem of environmental pollution caused by the dense smoke produced by ordinary carbonization machines in the carbonization project, and also solves the problem of heat energy required by the equipment, fully achieves self-sufficiency, improves the continuity and economy of equipment, and makes full use of agricultural and forestry waste. things, turning waste into treasure.

Working principle of palm shell charcoal machine

The carbonization machine is to burn the material through the gasification furnace first to generate flue gas. After the gas purification system is concerned about the removal of gas impurities such as wood tar and smoke, the flue gas is transmitted into the carbonization machine for combustion. When a certain temperature is reached, the carbonization machine adds the required The carbonized material is transported through the pipeline to make the material burn in the carbonization machine. The combustion of organic matter needs to meet three points: heat, oxygen and organic matter. Because the carbonization machine is almost a closed space, it can meet the demand for oxygen deficiency, so that the material can be carbonized Under the high temperature of 800 degrees inside the machine, after adjusting the speed of the internal conveying device of the carbonization machine, it will not burn into ash, but only burn into charcoal. After the flue gas produced by the materials burned in the carbonization machine is treated by flue gas purification, it returns to the carbonization machine for combustion, so that the thermal energy of the machine can run continuously, achieving smoke-free, environmental protection and continuous effects. Finally, the charcoal is transported by the cooler to cool down, so that the temperature of the charcoal is only 50-80 degrees when it comes out. During the process of transporting the charcoal after it comes out, because the charcoal is fully exposed to the air, if the material density is high and relatively thick, although there is no open flame on the surface , there may be sparks in the core of the material, or it may spontaneously ignite. It is necessary to install mist spray equipment to reduce the temperature of the charcoal for the second time, so as to completely eliminate the source of fire.