What are the wearing parts of carbonizing machine?

 The vulnerable parts of the carbonization machine (the carbonization part of the mechanism charcoal machine can also be called the carbonization machine) mainly include but are not limited to the following:

1. Gasification furnace wall: During high-temperature production, the carbonization machine will absorb some moisture from the semi-finished product, and this moisture may flow onto the gasification furnace wall. If this operation principle is continued for a long time, the non-stainless steel gasification furnace wall may rust.

2. Rod making machine support base: Affected by the vibration of the rod making machine during production and operation, the support base will produce strong friction with the hard ground, and may be broken or worn over time.

3. Propeller (or screw): The propeller is a key vulnerable part on the carbonization machine (or the rod making part of the mechanism charcoal machine). The pitch size and angle will determine the rod output speed and density. Regular maintenance of the propeller can ensure smooth charcoal making.

4. Forming cylinder, cone sleeve, straight sleeve: These parts will also be worn during the carbonization process and need regular inspection and maintenance.

5. Heating coil: The heating coil is responsible for providing the temperature required for carbonization. Long-term use may cause aging or damage.

For the wearing parts of the carbonization machine, regular maintenance and inspection are essential. Once the wearing parts are found to be worn or damaged, they should be repaired or replaced in time to ensure the normal operation and production efficiency of the carbonization machine. At the same time, choosing the right materials and processes for repair is also the key to extending the service life of wearing parts. For example, for the rusted gasification furnace wall, stainless steel should be selected for repair; for the broken rod making machine support base, compression-resistant and wear-resistant steel should be selected for welding.

If you have any equipment and technical problems, please feel free to contact Zhengzhou Dingli New Energy Equipment Co., Ltd. The manufacturer will arrange professional engineers and sales managers to give you a detailed reply!